Husqvarna 131RB Workshop Manual page 30

6. Disconnect the cables.
7. Remove the clutch drum and clutch drum cover.
a) For the model 967 84 33-xx: Remove the 2
screws (A), the 4 screws (B) and pull out the
clutch drum assembly (C).
C
A
30 - Repair instructions
b) For the model 967 84 32-xx: Remove the 2
screws (A) and 2 washers. Remove the 4 screws
(B) and pull out the clutch drum assembly (C).
8. Remove the 2 screws (D), the cables (E), the
ignition module (F) and the 2 washers (G).
B
9. Remove the 2 screws and the 2 washers that hold
the centrifugal clutch. Lift off the clutch. Remove the
2 washers between the flywheel and the centrifugal
clutch.
C
A
G
F
B
E
D
627 - 002 - 23.04.2018