Fuel Tank - Husqvarna 543RBX Workshop Manual

7. Attach the grass guard and muffler guard.
8. Assemble the remaining parts in the opposite
sequence.

7.12 Fuel tank

7.12.1 To remove and install the fuel tank
1. Make sure that the fuel tank is empty.
2. Pull up the knob and remove the drive shaft tube.
56 - Repair instructions
3. Remove the throttle wire (A) from the throttle wire
joint (B). Remove the cables (C).
C
4. Turn the engine around its axle to access the air
filter and carburetor.
A
B
1239 - 001 -