Whirlpool GU1200XT Technical Education page 25

Removing the Pump Motor
1. With one hand, press back on the plastic
tab that holds the pump motor from rotat-
ing. (Fig. 3-18)
2. With the other hand, rotate the pump mo-
tor counterclockwise approximately ¼
turn. The pump motor will now be free of
the pump assembly.
Accessing Components of the Sump Assembly
Components inside the sump can be accessed without removing the sump from the dishwasher tub.
1. Remove the four (4) screws securing the soil accumulator from the sump base. (Fig. 3-19)
2. The soil accumulator will now lift free of the sump base. (Fig. 3-20)
Fig. 3-19
3. Remove the screw securing the foreign
objects protector to the sump base and
remove the protector. (Fig. 3-21)
4. Remove the screw securing the inlet pro-
tector to the pump base and lift the inlet
protector out. (Fig. 3-22)
5. Remove the chopper assembly from the
impeller shaft and lift it from the sump
base. (Fig. 3-23)
Fig. 3-23
Accumulator
Fig. 3-21
Chopper
Protector
Fig. 3-22
21
Fig. 3-18
Fig. 3-20
Inlet
Foreign
Object
Protector