Service Precautions; Notes On Soldering; Notes On Replacing Parts; Service Notice - Pioneer VSX-1022-K Service Manual

Hide thumbs Also See for VSX-1022-K:
Table of Contents

Advertisement

5

1. SERVICE PRECAUTIONS

1.1 NOTES ON SOLDERING

• For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.
Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs
accompanied by reworking of soldering.
• Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 ºC.
Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 ºC in general, although
the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of
the soldering iron.
Do NOT use a soldering iron whose tip temperature cannot be controlled.
Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting
temperatures (hard to melt/easy to harden).
The following lead-free solders are available as service parts:
• Parts numbers of lead-free solder:
GYP1006 1.0 in dia.
GYP1007 0.6 in dia.
GYP1008 0.3 in dia.

1.2 NOTES ON REPLACING PARTS

The part listed below is difficult to replace as a discrete component part.
When the part listed in the table is defective, replace whole Assy.
Assy Name
Ref No.
JA1001 - JA1007
JA9202
IC9501
IC9502
IC9503
IC9504
D-MAIN Assy
IC9506
IC101
IC103
IC1601
IC9203
IC9204
IC1001
IC805
F-USB Assy
IC1307

1.3 SERVICE NOTICE

• Discharging
For more detail, please refer to "7. DISASSEMBLY - 1. Discharging".
• Notes on Ground Points Connection
For more detail, please refer to "7. DISASSEMBLY - 2. Notes on Ground Points Connection".
5
6
Parts that is Difficult to Replace
Function
HDMI Connector
LAN Connector
D-MAIN 3.3V Power Supply IC
D-MAIN 1.2V Power Supply IC
D-MAIN 1.8V Power Supply IC
D-MAIN 3.3V Power Supply IC
D-MAIN 5V Power Supply IC
D-MAIN 5V Power Supply IC
D-MAIN 3.3V Power Supply IC
DSP IC
LAN PHY IC
NETWORK MEDIA PROCESSOR
HDMI INTERFACE IC
USB 5V SW IC
USB 5V SW Power Supply IC
VSX-1022-K
6
7
Part No.
Remarks
—————— JACK with Cu-through-hole & 21 pin
—————— JACK with Cu-through-hole & 10 pin
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC BGA type
—————— IC with heat-pad
—————— IC with heat-pad
—————— IC with heat-pad
7
8
A
B
C
D
E
F
5
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-42Vsx-822-k

Table of Contents