Table of Contents
Advertisement
1
1. SERVICE PRECAUTIONS
1.1 SERVICE PRECAUTIONS
A
1. You should conform to the regulations govering the product (safety, radio and noise, and other regulations),
and should keep the safety during servicing by following the safety instructions described in this manual.
2. Be careful about an internal sharp edge.
3. Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by
electrostatic induction.
4. Be careful in handing made from metal parts. There might be burr at the edge of it.
5. DEMO MODE is activated by Default Setting.
Keys other than followings are not accepted under DEMO MODE operation.
[SRC], [ESC] and [POWER] (However, POWER being OFF in case of POWER Key.)
B
Conduct performance confirmation after releasing DEMO MODE operation temporarily.
How to perform temporary releasing
DEMO operation is released temporarily with [SRC] or [ESC] Key on Main Body Key (or on Remote Controller) and
normal operation becomes possible.
How to make DEMO MODE to be OFF (There are two ways, (1) and (2))
DEMO MODE under operation
(1) Turn ACC from OFF to ON. This makes DEMO setting to be OFF.
(2) Temporarily release DEMO MODE (by pressing [SRC] or [ESC] Key) and change setting of DEMO in GENERAL
from setting menu by changing ON to OFF.
6. Two kinds of resetting are available
C
1) Turn over the Detach Panel and press RESET Button at Central Part.
Without entire initialization.
Microcomputer restarting (emergency resetting at function trouble) .
With the reset of the pioneer.
2) Perform [Default Setting] initialization in Setting
Perform product initialization except a part of items.
Please carry it out when updating software.
7. Any component parts in the DVD Mechanism Unit of this model can not be supplied.
If you need to replace any parts in the DVD Mechanism Unit, replace whole of DVD Mechanism Unit.
8. Graphically-illustrated areas become hot. Be careful not to burn yourself.
D
E
F
4
1
2
DVH-860AV/XEUW5
2
3
3
4
4
Advertisement
Table of Contents
