Identification Of The Machine; Make And Model Designation; General Description; Intended Use - Wega ALE Series Use And Maintenance Manual

2.

IDENTIFICATION OF THE MACHINE

Make and model designation

2.1
The identification and the model of the machine are
found on the NAMEPLATE and in the EC DECLARATION
OF CONFORMITY provided with the machine.
Below are some of the machine identification data.

General description

2.2
The machine object of this Manual consists of me-
chanical, electrical, and electronic components whose
combined action allows to make milk, coffee and water-
based beverages.
This product is manufactured in compliance with EU
Directives, Regulations and Standards indicated in the
EC DECLARATION OF CONFORMITY provided with the
machine.
This machine is designed and constructed to operate
only after being properly connected to a hydraulic and
electrical network and placed so as to be sheltered from
atmospheric agents.

Intended use

2.3
The espresso coffee machine is designed for the
professional preparation of hot drinks such as tea, cap-
puccino and weak, strong and espresso coffee, etc.
The device is not intended for home use.
The machine can be used in all operational conditions
contained or described in the User's Manual and in this
document; any other conditions must be considered
dangerous.
PERMITTED USES
All uses compatible with the technical characteris-
tics, operations and applications described in the User's
Manual and in this document that do not endanger the
safety of the User or Technician, or cause damage to the
machine or the environment.
All uses not specifically mentioned in the User's and Technician's
Manual are prohibited and must be expressly authorized by the
Manufacturer.
INTENDED USES
The machine is designed exclusively for professional
use.
TECHNICIANS manual
The use of products/materials other than those speci-
fied by the Manufacturer, which can cause damage to
the machine and dangerous situations for the operator
and/or those close to the Machine, is considered incor-
rect or improper.
CONTRAINDICATIONS OF USE
The machine must not be used:
For uses other than those listed in par. 2.3 , or for uses
not mentioned in this Manual;
With materials other than those listed in this Manual;
With disabled or not working safety devices.
INCORRECT USE OF THE MACHINE
The type of use and performance this machine is
designed for, imposes a number of operations and
procedures that cannot be changed, unless previously
agreed with the Manufacturer. All allowed practices are
contained in this document, any operation not listed
and described in this document is to be considered not
possible and therefore dangerous.
IMPROPER USE
The only permitted uses are described in the Manual,
any other use is to be considered not possible and there-
fore dangerous.
GENERAL SAFETY
The Qualified Technician must be aware of the risk of
accidents, the devices designed for safety, and the gen-
eral rules on the safety provided by EU directives and by
the legislation of the country where the line is installed.
Qualified Technicians should be aware of all machine
devices operation.
They must also have fully read this manual.
The maintenance work must be performed after
specially preparing the machine.
Tampering or unauthorized substitution of one or
more parts of the machine, the use of accessories that
modify the use and the employment of materials other
than those recommended in this Manual, may become
a cause of accidents.
7 68
of