Uart Send - Fujitsu MB2146-450-E Setup Manual

3.5.5 UART Send

Switch the mode to UART, the LCD will display the value of received data; if you want to
send data, the following operation will be an example.
Pressed mode key ---switch to UART mode
press confirm key to enter EDIT
Pressing left or right (select LED to change)
Press send key to send out and return receiving status
Note:
Status "0" ------ normal status
Status "1" ------ setting status
MB2146-450-E Setup Guide
Chapter 3 EV-board Manual
Status
up or down key to change the value
MCU-AN-500072-E-10 – Page 25
Data