Idc10 Interface Description; Bgma Usb Configuration - Fujitsu MB2146-450-E Setup Manual

2.3 IDC10 Interface Description

Pin Number
1 UVCC
2 GND
3 RSTIN
4 RSTOUT
5 RSV
6 RSV
7 RSV
8 DBG
9 RSV
10 RSV

2.4 BGMA USB Configuration

The BGMA is provided with a USB cable. Connect the BGMA to a PC with a USB cable. If
the connection is right, the following window will pop up. Follow the instructions displayed,
and then click "Next",
MB2146-450-E Setup Guide
Chapter 2 BGMA Manual
Pin Name
Target MCU Vcc
Target MCU Vss
Target MCU reset input
Target MCU reset output
Reserved
Reserved
Reserved
Target MCU debug pin
Reserved
Reserved
Figure 2.4-1 Install BGMA in Windows (1)
MCU-AN-500072-E-10 – Page 9
Description