Uart Send - Fujitsu MB2146-450-E Setup Manual

3.5.5 UART Send

Switch the mode to UART, the LCD will display the value of received data; if you want to
send data, the following operation will be an example.
Pressed Mode key ---switch to UART mode.
Press Confirm key to enter EDIT.
Press Left or Right to select a LED
Press Send key to send out and return receiving status.
Note:
Status "0" ------ normal status
Status "1" ------ setting status
The baud rate of the EV-Board sample code is 9600.
EV BOARD MB2146-450-E V1.3
Chapter 3 EV-board Manual
Status
Up or Down to change the value.
MCU-AN-500072-E-13 – Page 25
Data