Led Description - Fujitsu MB2146-450-E Setup Manual

2.5 LED Description

First, when USB cable is plugged to PC, check the Power LED turning Green or not. Refer to
Figure 2.5-1.
Second, plug IDC10 cable to the EV-board (target MCU board), then turn on EV-board. After
that, check Power LED on the BGMA turning Orange or not. Refer to Figure 2.5-2.
MB2146-450-E Setup Guide
Chapter 2 BGMA Manual
Figure 2.5-1 BGMA Power LED (1)
Figure 2.5-2 BGMA Power LED (2)
MCU-AN-500072-E-10 – Page 12