Draytek Vigor 2762 Series Quick Start Manual page 6

Interface Description
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
Factory Reset
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LAN4 Connectors for local networked devices.
Connector for accessing the Internet.
DSL
I / O Power Switch.
PWR Connector for a power adapter.
3