Table of Contents
Advertisement
•
•
•
Updating the Firmware
Firmware for all the touchpanels can be upgraded using Toolbelt or the touchpanel web page.
Before starting, consult your IT team and ensure that the touchpanel has a unique IP address.
Downloading Firmware
1.
2.
There is a single page, most of which is read-only, providing general and network information
about the unit. Use the
Setup Menu
touchpanel network settings.
Licence Information to see information about Network Port Requirements and
Click
Licensed Third-Party Software Used by the Touchpanels for the TLP Pro 1225, 1525, and
1725 series touchpanels.
Firmware Uploader panel to upgrade the unit firmware (see "Updating the
Use the
Firmware" in the following section).
Open the
Extron website
and select the
Firmware (
Click the
2
) option at the bottom of the page.
Figure 24.
Firmware Download
TLP Pro 1225, 1525, and 1725 Series • Configuration Software
(see page 14) or Toolbelt to configure the
Download tab (
).
1
25
Advertisement
Table of Contents
