Firmware Upgrade Page - Extron electronics MKP 2000 User Manual

Firmware Upgrade Page

The
Firmware Upgrade
is coded on the MKP control board without taking the MKP out of service, opening the
enclosure, and replacing the firmware chip.
To access the
sidebar menu of the
Figure 33.
NOTE: The
MKP operation. To insert your own HTML pages, see
Page
Update the MKP firmware as follows:
1. Visit the Extron website at www.extron.com, and select either of the following:
• Download tab > Firmware
• MKP 2000 product page > Downloads > MKP 2000
2. Select the latest firmware file for the MKP and download it. Note the folder to which you
save the firmware file.
NOTE: The firmware file name may read, in part, MKP 2000 or MKP 3000. This is
normal. The firmware is the same for both products.
3. Connect the MKP to your computer via the MKP Ethernet port.
4. Access the MKP using the HTML pages.
5. Select the
6.
Click the
7. On the
opens (see figure 34).
Figure 34.
page (see figure 33) enables you to replace the firmware that
page, select the
Firmware Upgrade
Configuration
Firmware Upgrade Page
page is only for replacing the firmware that controls all
Firmware Upgrade
on page 43.
tab.
Configuration
link on the left sidebar menu.
Firmware Upgrade
page, click the
Firmware Upgrade
Firmware Upgrade Choose File Window
Firmware Upgrade
tab.
Using the File Management
(from the sidebar menu)
> MKP 2000
(in FIRMWARE section)
button. A
Browse
MKP 2000 • HTML Operation
link on the left
window
Choose File
41