Slant/Fin EUTECTIC EC-10 Series Assembly Instructions Manual page 5

5
Installing the insulating material
- Pass the strap between the cast iron body and the base.
- Install the insulation around the body, folding the bottom on each side of the boiler inside the base.
6
3
Fix the insulation using the strap(s) and the attach-
ment strip .
2
2
5
notch in front
1
- 1 strap on the 3 and 4 section versions,
1
- 2 straps on the 5 and 6 section versions
- Put the back insulation into place and fix it onto the pre-
viously installed insulation using the fasteners
8575N021A
8575N022
.