Table of Contents
Advertisement
Replacing the Memory Fan
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before Working Inside Your
Working Inside Your
regulatory_compliance.
Procedure
1. Align the tabs on the memory fan with the slots on the chassis and slide the fan until it snaps into position.
2. Replace the screw that secures the memory fan on the chassis.
3. Connect the memory fan cable from the connector on the system board. For more information on the memory fan cable
connector, see
"System Board
Post-requisites
1. Replace both the left and right side-panels. See
2. Replace the
stability
foot.
62
Computer. After working inside your computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/
Components".
"Replacing the Side
Panels".
After
Advertisement
Table of Contents
