Follow Me Function (Wall Mounted Indoor Unit Only); Child Lock; Key Pad Tone Setting; F / °C Selection - Bosch BMS-WT1 Series User Manual

User Manual

6.4 Follow Me Function (Wall Mounted Indoor Unit Only)

By default, room temperature will be measured from the sensor in indoor unit.
Follow me function can be activated in order detect room temperature from the
wired wall thermostat rather than the indoor unit for better comfort.
1. Press Copy/Follow me to activate the function.
Copy/
Follow me
Figure 32
2. Follow me picture shows up on display.
Figure 33
B y default, Follow me function in the wired thermostat will be turned on
with 4-Way Cassette and Ducted Indoor models.

6.5 Child Lock

1. Press LOCK for 3 seconds to activate the CHILD LOCK.
Fan speed
(Lock)
Figure 34
2. Press again for 3 seconds to deactivate.
Bosch Thermotechnology Corp. | 06.2019
Bosch Climate 5000 Series Wired Wall Thermostat | 13

6.6 Key Pad Tone Setting

1. Press Swing and Timer simultaneously for 3 seconds to disable the key pad
tone.
Swing
Figure 35
2. Press both buttons again for 3 seconds to enable the key pad tone.
6.7 °F / °C Selection
1. Press Back/Turbo and Timer simultaneously for 3 seconds to change
between °F and °C.
Back/Turbo
°C
Figure 36

6.8 Turbo Mode

1. Press Back/Turbo to activate Turbo mode. Fan speed setting will be changed
to the highest level to satisfy users' set temperature in the shortest time.
Figure 37
6.9 Decorative Grille Automatic Lift Up/Down (works with 4-Way
Cassette Indoor only)
1. Turn off the system by pressing the Power button.
Figure 38
Timer
Copy/
Follow me
°F
Back/Turbo
Data subject to change