Installation (For Contractors Only); Installation - Bosch FR 10 Installation And Operating Instructions Manual

|
118

Installation (for contractors only)

3 Installation (for contractors
only)
DANGER: Risk of electric shock!
B Before installing this accessory:
Disconnect the power supply (220 to 240 V AC)
to the heating appliance and all other BUS
subscribers.
3.1

Installation

The quality of control of the FR 10 is influenced by the installation
location.
The installation location (= lead room) must be suitable for
controlling the heating system or heating circuit.
B Select installation location (
B Remove top section from base. (
The mounting surface on the wall should be level.
B Fit the base (
B Make electrical connections (
B Push on top section.
Fig. 5 on page 161).
Fig. 3 on page 161).
Fig. 4 on page 161).
Fig. 6 on page 162).
6 720 645 356 (2010/09)