Tool Storage; Maintenance - Morphy Richards Supervac deluxe Instruction Book

VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 8

Tool storage

When not in use, the attachments may be stored
in the tool storage
as shown (right).
Attach the dusting brush
1.
nozzle (26) as shown above.
Slide the combined dusting brush and upholstery
2.
nozzle onto the crevice tool (27).
Push the base of the crevice tool into the tool
3.
storage.

Maintenance

The guarantee may be invalidated if the motor
is damaged due to: using the appliance
without the filter(s) installed; not cleaning the
filter(s); not replacing a damaged filter; not
clearing any blockages.
Your cleaner is manufactured to withstand normal
day-to-day use, but occasionally wipe over with a
damp cloth to help maintain its good looks. Take
care not to get the electrical connections wet.
Abrasive cleaners should not be used.
8
(30) on the charging cradle
(25) to the upholstery
Maintenance - emptying
the dust canister and
cleaning the filters
(29)
Empty the dust canister
does not look full, this will maintain the
performance.
To ensure optimum suction and performance, we
recommend that the canister is only filled to the
line shown on the side of the canister.
We recommend cleaning the filter
checking for any blockages every time the
dust canister (12)
The dust canister can be quickly and easily
emptied:
Press the dust canister release button
1.
pull the dust canister
handheld vacuum cleaner (15).
Remove the main filter
2.
Use the dust canister swing base release button
3.
(18) to open the dust canister swing base (21).
(12) regularly even if it
(11) and
is emptied.
(10) and
(12) away from the
(11) and set aside.
11
11b 12