Using In Upright Mode; Handheld Vacuum Cleaning - Morphy Richards Supervac deluxe Instruction Book

VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 6

Using in upright mode

Assemble the product for upright vacuum
cleaning (see 'Assembly in upright mode', page
5).
IMPORTANT: When using the motorised floor
brush (22), never keep it in one location on
the floor for an extended period and do not
leave the product running whilst standing still.
The rotating brush bar could cause damage
to some floor coverings if the floor is exposed
to the rotating brush action for a continued
period of time.

Handheld vacuum cleaning

1
This function is ideal for cleaning stairs,
curtains and upholstery.
1
To separate the upright handle
handheld vacuum cleaner (15), press the
upright handle release buttons
the upright handle away from the handheld
vacuum cleaner.
2
To enhance the appearance, you may wish
to insert the upright handle connector hole
plug (13a) into the upright handle connector
hole (13b). This is optional.
To remove again, press the upright handle
release buttons
6
1
2
(3) from the
(14) and pull
(14) and pull the plug out.
If cleaning floors under tables, chairs or low lying
furniture , press the back saver handle button
pivot the upright handle forwards, allowing the
main body to drop parallel with the floor without
you having to bend down.
To attach the motorised floor brush
handheld vacuum cleaner (15), push the neck of
the motorised floor brush into the handheld
vacuum cleaner suction inlet
place.
To separate the motorised floor brush from the
handheld vacuum cleaner, press the handheld
vacuum cleaner attachments release buttons
and pull the motorised floor brush away from the
handheld vacuum cleaner.
2
(1) to
2
(22) to the
(20) until it clicks into
(19)