Ec Declaration Of Conformity - Husqvarna T525 Operator's Manual

EC Declaration of conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares under sole responsibility that
the chainsaw for tree-service Husqvarna T525 from
2017's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent
serial number), are in conformity with the requirements
of the COUNCIL'S DIRECTIVES:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU.
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
• of June 8, 2011 "on the restriction of the use of
certain hazardous substances in electrical and
electronic equipment" 2011/65/EU.
The following standards have been applied: EN ISO
12100:2010, EN ISO 14982:2009, EN ISO
11681-2:2011/A1:2017, EN 50581:2012
Notified body: 0404, RISE SMP Svensk Maskinprovning
AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried
out EC type examination in accordance with the
machinery directive's (2006/42/EC) article 12, point 3b.
The certificates for EC type examination in accordance
with annex IV, has the number: 0404/17/2479 – T525.
In addition, 0404, RISE SMP Svensk Maskinprovning
AB, Box 7035, SE-750 07 Uppsala, Sweden, has
certified conformity with annex V of the Council's
Directive of May 8, 2000 "relating to the noise emissions
in the environment" 2000/14/EC. The certificate has the
number: 01/161/111 - T525.
For information relating to noise emissions, refer to
Technical data on page 29 .
The supplied chainsaw conforms to the example that
underwent EC type examination.
Huskvarna, 2017-07-21
Per Gustafsson, Development manager (authorized
representative for Husqvarna AB and responsible for
technical documentation.)
32
EC Declaration of Conformity
1007 - 003 - 28.08.2019