Accessories; Recommended Cutting Equipment; Low Kickback Saw Chain; Kickback And Guide Bar Nose Radius - Husqvarna T525 Operator's Manual

2
Front handle, m/s
2
Rear handle, m/s
Saw chain/guide bar
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, m/s.

Recommended cutting equipment

Chainsaw models Husqvarna T525 have been
evaluated for safety according to EN ISO 11681-2:2011/
A1:2017 (Machinery for forestry - Portable chainsaws -
Safety requirements and testing. Part 2: Chainsaws for
tree service) and fulfill the safety requirements when
equipped with the below listed guide bar and saw chain
combinations.

Kickback and guide bar nose radius

Guide bar
Length, in/cm Pitch, in
10/25 1/4
12/30 1/4
10/25 3/8
12/30 3/8
10/25 3/8
12/30 3/8
The usable cutting length is usually 1 in less than the
nominal guide bar length.
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain. A
Husqvarna file gauge makes sure that you get the
30

Accessories

Gauge, in/mm Max. nose ra-
dius
0.050/1.3 R10
0.050/1.3 R10
0.050/1.3 7T
0.050/1.3 7T
0.050/1.3 7T
0.050/1.3 9T
Husqvarna T525
4.9
5.2
3/8"/Spur 6, 1/4"/Spur 8
24.1

Low kickback saw chain

A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
Saw chain
Type
Husqvarna
H00
Husqvarna
H37
Husqvarna
S93G
correct filing angles. The part numbers are given in the
table below.
If you are not sure how to identify the type of saw chain
on your product, refer to www.husqvarna.com for more
information.
Length, drive Low kickback
links (no.)
60
68
40 Yes
45
40 Yes
45
1007 - 003 - 28.08.2019