Accessories - Husqvarna 240i Operator's Manual

Hide thumbs Also See for 240i:

Table of Contents

Vibration levels

Front handle m/s

Rear handle m/s

Saw chain/guide bar

Recommended bar lengths, in/cm

Usable cutting length, in/cm

Type of drive sprocket/number of teeth

Maximum chain speed / (Normal mode), m/s

Maximum chain speed / (SavE mode), m/s

Guide bar and saw chain combinations

The cutting attachments below are approved for the

Filing equipment and filing angles

Use a Husqvarna file gauge to sharpen the saw chain.

A Husqvarna file gauge makes sure that you get the

correct filing angles. The part numbers are given in the

table below.

Vibration level, according to EN 62841-4-1. Reported data for vibration level has a typical statistical dispersion

(standard deviation) of ± 1.5 m/s

a bar length and recommended chain type. If the machine is fitted with a different bar length, the vibration

level may vary by max ± 1.5 m/s

1951 - 003 - 20.06.2023

. Declared vibration data from measurements when the machine is fitted with

Accessories

Max. nose ra-

If you are not sure how to identify the type of saw chain

on your product, refer to for more information.

14-16-18/35.6-40.6-45.7

13-15-17/33.7-37.6-43.1

Table of Contents