Download
Share
Print this page
EverFocus EHA2580 eZ.HD Series User Manual
  1. Manuals
  2. Brands
  3. EverFocus Manuals
  4. Security Camera
  5. EHA2580 eZ.HD Series
  6. User manual

EverFocus EHA2580 eZ.HD Series User Manual

5mp ip66 ir dome camera
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
EHA2580 eZ.HD Series
5MP IP66 IR Dome Camera
User's Manual
Copyright © EverFocus Electronics Corp.
Release Date: September, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw

Advertisement

loading

Related Manuals for EverFocus EHA2580 eZ.HD Series

Summary of Contents for EverFocus EHA2580 eZ.HD Series

  • Page 1 The images may vary depending on the product and software version. Information contained in this document is subject to change without notice. EverFocus Taiwan: 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw...
  • Page 2 1. Introduction Equipped with a 5MP Sony STARVIS CMOS sensor, the EverFocus eZ.HD series cameras – EHA2580 deliver 5MP image quality. The model provides 2.8-12mm lens with ICR. Featured with True Wide Dynamic Range (T-WDR), the camera can provide clear images even under backlight circumstances where intensity of illumination can vary excessively.

  • Page 3: Installation

    1.4 Optional Accessory Type Wall Mount Bracket Image Model BA-EB45 BA-EB28 BA-EB18 Color White / Metal White / Metal White / Metal Size 245x160x163mm 140x136x233mm 120x207x134mm (WxDxH) 9.65”x6.3”x6.42” 5.51”x5.35”x9.17” 4.72”x8.15”x5.28” Weight 2.1kg / 4.63lb 2.1kg / 4.63lb 1.1kg / 2.43lb Type Ceiling Mount Bracket Image...
  • Page 4 2. To mount the camera to the surface: a. Remove the Base Plate from the camera. To do so, 1) Remove the Fix Screw 2) Slightly push the Base Plate backward from the Fix Screw side and then pull out the Base Plate. Screw the Base Plate to the surface using the supplied 4 Screws.
  • Page 5 d. Attach the Camera Body to the Base Plate. Screw back the Fix Screw. Base Plate Camera Body Fix Screw 3. Connect the Power Cable to a 12VDCpower source. Connect the Video Output Cable to a monitor or DVR. 4. You can use the Joystick on the cable to configure camera OSD settings. Remove the Protection Cap from the Joystick before using it.
  • Page 6 3. Configuration in the OSD Menu No Main Sub Menu Sub Menu / Function Level 0-10 Edge Det Color YEL, CYN, GRN, MAG, RED, BLU, BLK, WHT Brightness 0-20 Auto Mode Normal / Deblur 1/30, 1/60, 1/120, 1/250, 1/500, Shutter Manual Speed 1/1000, 1/2000, 1/4000, 1/8000,...
  • Page 7 IR LED Adaptive, Off Anti-Sat. 0-20 Extern SW High, Low Extern D>N Thres 0-20 N>D Thres 0-20 Delay High, Middle, Low Auto Autoext Preset Color C-Temp 3000K, 5000K, 8000K Manual R-Gain 0-20 B-Gain 0-20 Color Gain 0-20 High, Middle, Low, Off Sharpness 0-10 Gamma...
  • Page 8 Window Use Window Zone On, Off Det H-POS 0-80 Det Window Det V-POS 0-60 Det H-Size 0-80 Motion Det V-Size 0-60 Sensitivity 0-10 Motion OSD On, Off Text Alarm On, Off Signal Out On, Off 4K/15fps, 4MP/30fps, 1080p/30fps, Frame Rate 5MP/12.5fps, 5MP/20fps, 4MP/15fps Freq 60Hz, 50Hz...