Advertisement
Quick Links
EHA1281 eZ.HD Series
1080p Dual Power FHD IP66 IR Dome Camera
User's Manual
Copyright © EverFocus Electronics Corp.
Release Date: November, 2022
All the images including product pictures or screen shots in this document are for example only.
The images may vary depending on the product and software version. Information contained
in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
Advertisement
Related Manuals for EverFocus EHA1281 eZ.HD Series
Summary of Contents for EverFocus EHA1281 eZ.HD Series
- Page 1 The images may vary depending on the product and software version. Information contained in this document is subject to change without notice. EverFocus Taiwan: 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw...
- Page 2 1. Introduction Equipped with a 1080p Sony CMOS sensor, the EHA1281 deliver 1080p full HD image quality. The model provides 2.8-12mm lens with ICR. Featured with Digital Wide Dynamic Range (D-WDR), the camera can provide clear images even under backlight circumstances where intensity of illumination can vary excessively. The EHA1281 supports dual power (12VDC / 24VAC) and supports both NTSC and PAL scanning systems.
-
Page 3: Installation
1.4 Optional Accessory Type Wall Mount Bracket Junction Box Image Model BA-EB45-A BA-EB18-A Name Color White / Metal White / Metal Size Φ136mm 208L*120mm (WxDxH) Weight 285g 215g Type Ceiling Mount Bracket Image Model BA-EB3A-A BA-EB3B-A Color White / Metal White / Metal Name Size... - Page 4 2. To mount the camera to the surface: a. Remove the Base Plate from the camera. To do so, 1) Remove the Fix Screw 2) Slightly push the Base Plate backward from the Fix Screw side and then pull out the Base Plate. Screw the Base Plate to the surface using the supplied 4 Screws.
- Page 5 d. Attach the Camera Body to the Base Plate. Screw back the Fix Screw. 3. Connect the Power Cable to a 12VDCpower source. Connect the Video Output Cable to a monitor or DVR. 4. You can use the Joystick on the cable to configure camera OSD settings or switch to different video formats.
-
Page 6: Configuration In The Osd Menu
3. Configuration in the OSD Menu You can configure camera settings in the OSD menu from DVR end. No Main Sub Menu / Function Menu Lens Manual / DC Brightness 0-100 Auto Spee 1/25,1/50, 1/200, 1/400, 1/1000, Shutter Manual 1/2000, 1/5000, 1/10000 Flicker Sens-Up Off, x2, x4, x8, x10, x15,x20,x25,x30... - Page 7 Cam Title Off/ On Freeze On/Off Mirror V-flip D-effect Rotate Neg Image On/Off Return Select Area: 1-4 Display On/Off Sensitivity 0-100 Color Red/Green/Blue/White Trans 0, 0.25,0.75,1 View Off/Block/Outline/All Motion Type OSD View On/Off Alarm Alarm On/Off Time 0-15 Return Default On/Off Return Select Area 1-4...
- Page 8 Level 0-10 Start AGC 0-255 Sharpness Auto ENR AGC 0-255 Return Monitor On/Off Adjust Comet On / Off Monitor Out AHD/THD/CHD/CVBS Output Output Size 1080P/720P Mode Video Out NTSC/PAL Return Return...
-
Page 9: Everfocus Electronics Corp
175-0082, Japan TEL: +81 (3) 4363-2819 FAX: +81 www.everfocus.com (3) 4363-2790 sales@everfocus.com www.everfocus.co.jp sales@everfocus.co.jp Your EverFocus product is designed Ihr EverFocus Produkt wurde and manufactured with high quality entwickelt und hergestellt mit materials and components which can qualitativ hochwertigen Materialien be recycled and reused.