Input Signal
Click Input Signal to view the status of the input signal connected to the HDMI input (if
one is present).
HDMI Input Page - Input Signal
Sync Detected: Reports whether the HDMI input signal is synced to the DGE
•
Resolution: The resolution of the input signal
•
Source HDCP: Reports whether HCDP is active on the input signal
•
Click + More details at the bottom of the Input Signal tab to display an expanded
section that shows additional input signal information. If + More Details is selected, click
- Less details to collapse the section.
DM In (DM-DGE-200-C Only)
Select DM IN from the DM-DGE-200-C navigation menu to display selections for
configuring the DM input settings.
Click on a selection name to expand the selection. If the selection is expanded, click the
selection name again to collapse the section.
DM In Page Selections
Each selection is described in the sections that follow.
Supplemental Guide – DOC. 7696C
DGE-100/DM-DGE-200-C: Digital Graphics Engines • 25