Device - Crestron DGE-100 Supplemental Manual

Add Certificate Dialog Box
To add a new certificate:
1. Click + Browse.
2. Navigate to the CA file on the host computer.
3. Select the CA file, and then click Open.
4. Click ↑ Load to load the CA file to the DGE. The upload progress is shown in the
dialog box.
5. Once the DGE has completed the upload, click OK.
Click the x button to close the Add Certificate dialog box at any time during the upload
process. Clicking the x button before the CA file is uploaded to the DGE cancels the
upload.
Click the x button to close the Manage Certificates dialog box and to return to the
802.1x Authentication page.
Click Save Changes next to the 802.1x Configuration tab to save any changes. Click
Revert to revert to the last saved settings.

Device

Select DEVICE from the navigation menu to display selections for configuring the DGE
device settings.
Click on a selection name to expand the selection. If the selection is expanded, click the
selection name again to collapse the section.
Network Page Selections
Each selection is described in the sections that follow.
34 • DGE-100/DM-DGE-200-C: Digital Graphics Engines Supplemental Guide – DOC. 7696C