Hdmi Input - Crestron DGE-100 Product Manual

Control System Connections
Expand the Control System Connections accordion to display the status of a control system
connected to the DGE.
The following Control System Connections information is displayed:
IP ID: The IP ID used to connect the DGE to the control system.
l
Room ID: The control system room ID that the DGE is associated with (for connections to
l
the Crestron Virtual Control server-based control system).
IP Address/Hostname: The control system IP address or host name.
l
Type: The control system connection method.
l
Port: The control system server port.
l
Connection Type: The control system connection type.
l
Status: The control system connection status.
l
SSL Mode: The SSL mode (Encrypt and Validate, Encrypt, or OFF) used for the control
l
system connection.
For information on configuring control system connection settings, refer to
page 73.
HDMI Input
Select HDMI INPUT from the navigation menu to display collapsible accordions for configuring
the HDMI input settings.
Select an accordion name to expand the section. If the section is expanded, select the accordion
name again to collapse it.
Each selection is described in the sections that follow.
Product Manual — Doc. 7696D
Control System on
DGE-100 and DM-DGE-200-C • 59