Configure Date/Time - Crestron DGE-100 Supplemental Manual

Configure Date/Time

Click Configure Date/Time to configure date and time settings for the DGE.
Device Page - Configure Date/Time
Time Synchronization
•
Enable Time Synchronization: Toggle the switch to turn time synchronization
-
via SNTP (Simple Network Time Protocol) on or off.
Time Server: With Enable Time Synchronization set to On, enter the SNTP
-
server used to synchronize the date and time for the DGE.
Synchronize Now: With Enable Time Synchronization set to On, tap
-
Synchronize Now to synchronize the DGE with the SNTP server entered for
Time Server.
Time Configuration
•
Time Zone: Select a time zone for the DGE using the drop-down menu.
-
Time(24hr Format): Select the time for the DGE (in 24-hour format) using
-
the pop-up menu that is displayed.
Date: Select the date for the DGE using the pop-up calendar that is
-
displayed.
Click Save Changes next to the Configure Date/Time tab to save any changes. Click
Revert to revert to the last saved settings.
Supplemental Guide – DOC. 7696C DGE-100/DM-DGE-200-C: Digital Graphics Engines • 41