System Configurations - Kenwood TS-990S In-Depth Manual

System Configurations

Typical software configurations to control the TS‑990S are described below.
● Controlling the TS‑990S from the PC through a LAN Connector (with a Microphone
connected to the TS-990S and an Internal Speaker)
Signal Type
Software
Control
ARCP‑990
signal
Audio signal
● Controlling the TS‑990S from a PC through the USB Connector (with a Microphone
connected to the TS-990S and an Internal Speaker)
Signal Type
Software
Control Virtual COM port
signal driver and ARCP‑990
Audio signal
● Controlling the TS‑990S from a PC through the COM Port (with a Microphone connected
to the TS-990S and an Internal Speaker)
Signal
Type
Software
Control
ARCP‑990
signal
Audio signal
● Controlling the TS‑990S from a PC (with a Microphone and Speaker connected to the PC
and Audio Connection to the USB Connector on the TS-990S)
Signal Type
Software
Virtual COM
Control
port driver and
signal
ARCP‑990
Windows standard
Audio signal drivers and ARUA‑
PC
Hardware
PC
Hardware
PC
Hardware
PC
Hardware
Microphone and
speaker connected
10 to a PC
Connection
Method
LAN Cable
No Microphone connected to the TS‑990S
connection
Connection
Method
USB cable
No Microphone connected to the TS‑990S
connection
Connection
Method
RS‑232C
cable
No Microphone connected to the TS‑990S
connection
Connection
Method
USB cable
SOFTWARE 07
TS‑990S
Hardware
LAN connector
and internal speaker
TS‑990S
Hardware
USB‑B connector
and internal speaker
TS‑990S
Hardware
COM port
and internal speaker
TS‑990S
Hardware
USB‑B connector
75