Radio Control Program Arcp-990; Basic Specifications Inherited From The Arcp-590; User Interface - Kenwood TS-990S In-Depth Manual

Hide thumbs Also See for TS-990S:

Table of Contents

Radio Control Program ARCP‑990

The radio control program (ARCP‑990) is a software application dedicated for the control of the TS‑990S from a PC.

The ARCP‑990, inheriting the basic specifications of the ARCP‑590 developed for the TS‑590S, is designed to be able

to operate the most TS‑990S functions. The ARCP‑990 also conforms to the new functions of the TS‑990S.

The ARCP‑990 has its user interface languages in both Japanese and English. The ARCP‑990 is operable with the

language familiar to the user.

On the ARCP‑990, new frequency change methods are employed:

• Frequency change with the mouse wheel

• Frequency change with the Up and Down buttons for tuning

• Frequency change with the Up/Down buttons for Multi/Channel

• Frequency change with direct input

• Frequency change by clicking on the frequency indication

• Frequency change by left‑clicking on the Bandscope screen (touch screen tuning)

To make a frequency change with the mouse wheel, rotate the mouse wheel on the "Coarse" or "Fine" image in the

"Tuning (Main Band)" and "Tuning (Sub Band)" frames, or rotate the mouse wheel on the "Tuning" image in the "Multi/

Ch"and "RIT/XIT" frame.

To make a frequency change with the mouse wheel or UP/Down buttons for tuning, the tuning step frequency is

selectable in the "Tuning Step Frequency" list box.

In the TS‑990S, the number of functions and buttons on the main window increase; hence, a display of SXGA (1280 x

1024) or higher resolution is required. Therefore, the size of the main window can now be resized for sufficient display

Fig. 121 ARCP‑990 Main Window

SOFTWARE 07

Table of Contents