Section 4: Tractor Maintenance; Lubrication Table - Cub Cadet 5264D Operator's Manual

SECTION 4: MAINTENANCE
The service life and reliability of any machine
depends upon the care it is given. Proper lubrica-
tion and maintenance is a vital part of that care.
Using the Lubrication and Maintenance Chart as a
guide, monitor the hourmeter on the instrument
panel to ensure the required maintenance proce-
dures are performed. The maintenance schedule
reflects the minimal requirements to maintain the
equipment. More frequent inspections and mainte-
nance is preferable.
Make certain that all lubrication fittings are installed
and functioning. Wipe away all old grease and dirt
from the lube fittings to prevent foreign materials
from entering as the new grease is applied. Use a

LUBRICATION TABLE

Type of
Application
Lubricant
Engine Engine
Hydrostatic
Transmis-
Cub Cadet
sion
Drive System
and
Fluid Plus
Hydraulic
System
Front Wheel Gear Lube
Drive Axle
Lube
Grease
Fittings
Radiator
and
Antifreeze
Overflow
Reservoir
Capacity
Classifi-
cation
Approx.
Oil 3.5 Qts.
w/Filter
Approx.
20 Qts.
(5.0 Gal.)
Approx.
82 Oz.
(2.5 Qts.)
As
Needed
Approx.
5.3 Qts.
pressure lubricating gun to force in new grease.
Apply pressure until clean grease emerges from the
lubrication point.
Miscellaneous working parts not provided with
lubrication fittings should be oiled regularly with a
good grade of lubricating oil.
Lubricate the tractor thoroughly before taking it to a
remote location for a prolonged period of time.
Lubricant is cheap. Use plenty of it. Worn parts can
be expensive to replace.
Store your supply of lubricating grease and oil in
clean, covered containers to protect them from dust
and dirt. Keep the lubricating gun nozzle clean.
General Information
API Anticipated
Ambient
Temp.
Below 50°F
CF
or
CF-4
0°F and
Above
Above 32°F
Use Cub Cadet
Drive System Fluid Plus
737-3120 (1 Qt.)
737-3121 (1 Gal.)
Use Cub Cadet Gear Lube
737-3065 (1 Qt.)
Use Cub Cadet
251H EP Grease
737-3034 (14.5 Oz. Cartridge)
Use High Quality Permanent Type Antifreeze
(Ethylene Glycol with corrosion and rust
inhibitor chemicals)
Coolant Mixture Ratio
Distilled Water 50% : Antifreeze 50%
25
SAE
Description
Viscosity
Use High Quality
Diesel Engine Oil
5W-30
( A high quality
synthetic may be used)
Cub Cadet
737-3066 (1Qt.)
10W-30
Use High Quality
10W-40
Diesel Engine Oil
10W-50
Cub Cadet
737-3032 (1Qt.)
30W