DWM-312W
Configuring Local Area Network
Go to the Connections Setup / LAN page.
1.
2.
If needed, change the IPv4 address of the router's LAN interface and the
mask of the local subnet. To do this, click the IPv4 tab and specify
needed values in the IP address and Mask fields in the Local IP
Address section.
3.
If needed, specify your own IPv6 address of the router's LAN interface.
To do this, click the IPv6 tab. In the Local IPv6 Address section, click
the
ADD button (
the
IPv6 address and Prefix fields. Click the APPLY button.
). In the opened window, specify needed values in
Quick Installation Guide
25