Led Indicators - D-Link DWM-312W Quick Installation Manual

4g lte wireless m2m router with one module for two sim cards
Hide thumbs Also See for DWM-312W:
Table of Contents

Advertisement

DWM-312W

LED Indicators

LED
SIM A / SIM B
SIGNAL
INTERNET
PWR
In case all LEDs are blinking simultaneously, the device is in the emergency
mode. Restore the factory default settings via the hardware RESET button.
Mode
Solid green
Blinking green
No light
Solid green
Solid red
No light
Solid green
Blinking green
Solid red
No light
Solid green
Solid red
Blinking green
No light
Quick Installation Guide
Description
The LTE WAN connection is on.
2G/3G WAN connection is on.
No SIM card is installed or the
network mode is undefined.
The active SIM card signal strength
is above 50%.
The active SIM card signal strength
is below 50%.
The active SIM card is not installed
or is blocked.
The default WAN connection is on.
The default WAN connection is
active.
The default WAN connection is off
or there are no WAN connections
created.
The WAN cable is not connected.
The router is powered on.
The router is being loaded.
The firmware is being updated.
The router is powered off.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents