Part Identification Chart - Weider WEBE64410 User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
16mm x 18.5mm Spacer (8)
Leg Lever Spacer (9)
M8 Nylon Locknut (13)
M10 Nylon Locknut (11)
M6 x 16mm Screw (3)
M10 Washer (6)
M8 Washer (23)
M6 Washer (30)
5
M6 x 38mm Screw (4)
M6 x 62mm Screw (7)
M8 x 64mm Bolt (43)
M10 x 62mm Carriage Bolt (33)
M10 x 68mm Bolt (34)
M10 x 75mm Bolt (48)
M10 x 155mm Bolt (22)