Weider 831.159833 User Manual page 16

33. Wrap the Ab Cable (74) under a 90mm Pulley
(35). Attach the Pulley and a Cable Trap (38) to
the top hole in the pair of Pulley Plates (32) with
an M10 x 48mm Bolt (93) and an M10 Nylon
Locknut (90). Make sure the Cable Trap is posi-
tioned to hold the Cable in the groove of the
Pulley.
34. Wrap the Ab Cable (74) over a 90mm Pulley (35)
in the direction shown. Attach the Pulley to the
Double "U"-bracket (31) with an M10 x 45mm Bolt
(94) and an M10 Nylon Locknut (90).
35. Wrap the Ab Cable (74) under a 90mm Pulley
(35). Attach the Pulley and a Cable Trap (38) to
the indicated bracket on the Butterfly Base (1)
with an M10 x 48mm Bolt (93) and an M10 Nylon
Locknut (90). Make sure the Cable Trap is posi-
tioned to hold the Cable in the groove of the
Pulley.
36. Wrap the Ab Cable (74) around a 90mm Pulley
(35) in the direction shown. Slide a Cable Trap
(38) and the Pulley onto the M10 x 89mm Carriage
Bolt (95) in the Butterfly Base (1). Secure the
Pulley with an M10 Nylon Locknut (90). Make
sure the Cable Trap is positioned to hold the
Cable in the groove of the Pulley.
33
90
32
34
94
31
90
74
35
35
93
1
36
35
38
74
1
95
16
74
93
32
35
38
74
35
38
90
90