Weider 831.159380 User Manual page 10

15. See the inset drawing. Attach the Military
Press Arm (84) to the Pivot Arm (101) with
two 5/16" x 2 1/4" Bolts (33) and two 5/16"
Nylon Locknuts (3).
Press two 1 1/2" Square Inner Caps (32) into
the Military Press Arm (84). Press two 1"
Round Inner Caps (49) into the Military Press
Arm. Slide two 5" Plastic Handgrips (83) onto
the Military Press Arm.
Attach the Pivot Arm (101) to the Assist
Upright (74) with a 3/8" x 3 1/4" Bolt (67) and
a 3/8" Nylon Locknut (21).
16. Press two 1" x 2" Inner Caps (107) into the
Assist Arm (105).
Attach the Assist Arm (105) to the Leg Press
Upright (56) with a 3/8" x 6" Bolt (106), two
3/8" Flat Washers (9), and a 3/8" Nylon
Locknut (21). See the inset drawing. The
Assist Arm must be attached to the lowest
hole in the Leg Press Upright (56). The
Assist Arm must also be below the welded
bracket on the Assist Upright (74).
15
21
101
74
16
74
105
10
32
49
84
67
56
33
101
84
3
Bracket
105
74
56
106
107
9
32
83
56
9
21