Arm Assembly - Club Weider 16.8ST User Manual

Arm Assembly

9. Open the parts bags labeled ÒARM ASSEMBLYÓ.
Attach the Leg Lever Lock (11) to the front leg of the
Base (8) with a 5/16Ó x 3Ó Bolt (78), three 5/16Ó Flat
Washers (80), and a 5/16Ó Nylon Locknut (81). Do not
overtighten the Nylon Locknut; the Leg Lever
Lock must pivot easily.
10. Attach the Press Arm (46) to the Press Frame (12)
with two 3/8Ó x 2 1/2Ó Bolts (54) and two 3/8Ó Nylon
Locknuts (50).
Insert a 2Ó Square Inner Cap (33) into each end of
the Press Arm (46).
Turn one of the Adjustment Knobs (9) counterclock-
wise to loosen it. Pull out the Knob as far as possible
and slide a Handle (20) into the Press Arm (46).
Release the Knob and let it snap into one of the
adjustment holes in the Handle. Tighten the Knob
fully. Repeat for the other Handle.
11. Attach the Handles (105) to the Sliding Seat Frame
(74) with four 1/4Ó x 1 1/2Ó Bolts (101) and four 1/4Ó
Nylon Locknuts (25).
Press a 2Ó Square Inner Cap (33) into the indicated
end of the Sliding Seat Frame (74).
9
80
Front
Leg
80
81
10
50
9
11
33
101
101
74
25
105
9
78
11
8
12
46
54
9
33
20
20
33
105
25