Seat Assembly
38. Open the parts bag labeled ÒARM AND SEAT
ASSEMBLY.Ó
Attach a Seat (13) to the Seat Upright (37) with four
1/4Ó x 3/4Ó Bolts (17).
Turn the Adjustment Knob (9) counterclockwise to
loosen it. Pull out the Knob as far as possible and
slide the Seat Upright (37) into the seat frame on the
Main Upright (3). Release the Knob and let it snap
into one of the adjustment holes in the Seat Upright.
Tighten the Knob fully.
39. Attach the Backrest (41) to the Backrest Frame (15)
with four 1/4Ó x 3/4Ó Bolts (17).
Press a 3/4Ó Round Inner Cap (34) into each end of
the pad bar on the Backrest Frame (15). Slide a
Foam Pad (30) onto each end of the pad bar.
Press 1Ó x 2Ó Inner Caps (43) into the top and bottom
of the Backrest Frame (15).
40. Locate the Adjustment Knob (9) on the backrest tube
of the Main Upright (3). Turn the Knob counterclock-
wise to loosen it. Pull out the Knob as far as possible
and slide the Backrest Frame (15) into the backrest
tube.
Release the Adjustment Knob (9) and let the Knob
snap into one of the adjustment holes on the
Backrest Frame (15). Tighten the Knob fully.
38
37
17
9
39
43
17
15
17
34
Pad
Bar
30
40
Backrest
Tube
9
18
13
17
Adjustment
Holes
3
41
43
3
15
Adjustment
Holes
34
30