Table of Contents
Advertisement
4.3.4 PTZ Control
PTZ control is a little different between analog mode and full digital mode.
1) Digital channel – the digital channel needs to link PTZ; the remote device should connect
with PTZ with protocol correctly set also.
2) Analog channel – Only when the device is connecting with PTZ and configuring protocol
correctly is OK.
Operation interface is shown below. The functions include PTZ direction control, speed, zoom,
focus, iris, preset, tour, auto pan and so on.
1. When Decoder A (B) line connects with HDVR A (B) line, the connection is right.
2. Click [main menu] > [system configuration] > [PTZ configuration] to set the PTZ
parameters.
3. The PTZ functions are decided by the PTZ protocols.
Speed
Zoom
Focus
Iris
Preset
Hide
Direction Control
Page Switch
Picture 4.5 PTZ Setup
Set the PTZ rotation range. Default range: 1 ~ 8.
Click the
/
button to adjust the focal length of the
camera.
Click the
/
button to adjust the focus of the camera.
Click the
/
button to adjust the iris of the camera.
Click the
/
button to add or delete preset points.
The current interface will be temporarily hidden after clicking it.
Control the PTZ rotation. Control of 8 directions is supported.
(4 directions on Front panel is supported)
Switch between different pages.
26
Hybrid Digital Video Recorder
H.265 HDVR series
Advertisement
Table of Contents
