5.5 Sensor Function
Sensor function includes motion detection, video blind, video loss and abnormality.
5.5.1 Motion Detection
When system detects the motion signal that reaches the set sensitivity, the motion detection
alarm is on and the linkage function is turned on. The details are shown below.
Digital channel: It not only enables motion detection function at the local side, but also
enables the remote device that is connected. When remote device detects motion movement,
the local side will start alarm recording, provided this function is not enabled.
Channel
Enable
Sensitivity
Picture 5.4 Motion Detection
Choose the set motion detection channel.
The motion detection function is on when the box is checked.
Six options are provided in the sensitivity.
38
Hybrid Digital Video Recorder
H.265 HDVR series