Ptz - Planet Networking & Communication HDVR-430 User Manual

Schedule
Manual
Stop

4.3.5 PTZ

PTZ control is a little different between analog mode and full digital mode.
1) Digital channel – the digital channel needs to link PTZ; the remote device should connect
with PTZ with protocol correctly set also.
2) Analog channel – Only when the device is connecting with PTZ and configuring protocol
correctly is OK.
Operation interface is shown below. The functions include PTZ direction control, speed, zoom,
focus, iris, preset, tour, auto pan and so on.
1. When Decoder A (B) line connects with DVR A (B) line, the connection is
right.
2. Click [main menu] > [system configuration] > [PTZ setup] to set the PTZ
parameters.
3. The PTZ functions are decided by the PTZ protocols.
Speed
Zoom
Preset
Alarm is on according to schedule.
Click the button to start alarming of selected channel in any
state.
Click the button to stop alarming of selected channel in any
state.
Picture 4.8 PTZ Setup
Set the PTZ rotation range. Default range: 1 ~ 8.
Click the / button to adjust the focal length of the
camera.
Click the / button to add or delete preset points.
26
Hybrid Digital Video Recorder
HDVR series