Planet Networking & Communication HDVR-435 User Manual page 39

Region
Period
Interval/Sec.
Record delay/Sec.
Record Channel
Tour
Click the set button to enter the set area. The area is divided
into PAL 16X12. Red block means the motion is being detected
in the defensive area. White block means the unfenced area.
You can set the area as follows: Drag the mouse and draw the
area. Default: all selected blocks are detection areas.
Trigger the motion detection signal in the time section. You can
set by week or set uniformly. Each day is divided into four time
sections.
Only one alarm signal is turned on even there are several
motion detection signals in the set interval.
Delay a few moments and stop when the alarm state is turned
off. The default is 10 seconds.
Choose the recording channel (multiple options supported).
Trigger the video signal when the alarm is turned on.
It means that the selected channel is single window alternate
patrol preview. The interval is set in the [Main Menu]>[System]
> [Tour].
Picture 5.5 Region
39
Hybrid Digital Video Recorder
H.265 HDVR series