Table of Contents
Advertisement
5.6.4 PTZ/RS485 Device
When system is in hybrid mode or full analog mode, PTZ device and RS485 device are listed
on the PTZ configure page.
Channel
Protocol
Address
Baud Rate
Data bits
Stop Bits
Parity
Picture 5.17 PTZ Configuration
Choose input channel of dome camera.
Choose the corresponding dome protocol. (PELCOD as an
example)
Set as the corresponding dome address. Default: 1.
The address must be consistent with the dome
address
Choose the corresponding dome baud rate length. You can
control the PTZ and vidicon. Default: 9600.
Include 5-8 options. Default: 8.
Include 2 options. Default: 1.
Include odd check, even check, mark check, space check.
Default: none.
50
Hybrid Digital Video Recorder
H.265 HDVR series
Advertisement
Table of Contents
