To Set Up And Install The Switch In Your Network; Physical Installation; Premium Edge Switch Features - HP ProCurve 6200yl Series Access Security Manual

To Set Up and Install the Switch in Your
Network

Physical Installation

Use the ProCurve Installation and Getting Started Guide (shipped with the
switch) for the following:
■ Notes, cautions, and warnings related to installing and using the switch
and its related modules
■ Instructions for physically installing the switch in your network
Quickly assigning an IP address and subnet mask, set a Manager pass-
■
word, and (optionally) configure other basic features.
■ Interpreting LED behavior.
For the latest version of the Installation and Getting Started Guide for your
switch, refer to "Getting Documentation From the Web" on page 1-7.

Premium Edge Switch Features

The ProCurve 3500yl and 5400zl switches ship with the ProCurve Intelligent
Edge software feature set. Additional Premium Edge switch software features
for these switches can be acquired by purchasing a Premium Edge license and
installing it on the Intelligent Edge version of these switches. Part numbers
for the Premium Edge licenses are:
■ 3500yl switches: J8993A
■ 5400zl switches: J8994A
(Note that the ProCurve 6200yl switch is available only as a Premium Edge
switch .)
For the most current information about the features included in the Premium
Edge package, refer to the release notes for your product on the ProCurve
Networking web site. The Premium Edge License is available from your
ProCurve reseller.

To Set Up and Install the Switch in Your Network

Getting Started
1-9