Transmission Parameters; Application Parameters; Arc Welding; Axp000: Application - YASKAWA DX100 Operator's Manual

DX100
8.9
8.10

8.10.1 Arc Welding

8.10.1.1 AxP000: APPLICATION

8.10.1.2 AxP003: WELDING ASSIGNMENT OF WELDING START CONDITION
8.10.1.3 AxP004: WELDING ASSIGNMENT OF WELDING END CONDITION

8.10.1.4 AxP005: WELDING SPEED PRIORITY

8.10.1.5 AxP009: WORK CONTINUING

8 Parameter

8.9 TRANSMISSION PARAMETERS

TRANSMISSION PARAMETERS
These parameters are used when the optional FC1, FC2, or data
transmission function is used.
For details, refer to the optional manual "DX100 DATA TRANSMISSION
FUNCTION".

Application Parameters

This parameter specifies the application. Set "0" for arc welding.
FILE
This parameter specifies the beginning condition number in the welding
start condition file to be assigned to Power Source 2. Condition files of a
lower number are automatically assigned to Power Source 1. For a
system with one Power Source, set "49" (maximum value).
FILES
This parameter specifies the beginning condition number in the welding
END condition file to be assigned to Power Source 2. Condition files of a
lower number are automatically assigned to Power Source 1. For a
system with one Power Source, set "13" (maximum value).
This parameter specifies whether the welding speed is specified by the
"ARCON" instruction, by the welding start condition file, or by the
additional times of the "MOV" instruction.
This parameter specifies whether to output an "ARCON" instruction to
restart after the manipulator stopped while the "ARCON" instruction is
being output.
8-55

Condition file

Power
Source 1
Power
Source 2
Power
Source 1
Power
Source 2
RE-CSO-A037
155507-1CD
486 of 554