Parameters For Other Functions Or Applications; S1Cxg049 To S1Cxg051: Small Circle Cutting; S1Cxg052 To S1Cxg053: Small Circle Cutting; Direction Limit Value - YASKAWA DX100 Operator's Manual

DX100
8.7

8.7.0.1 S1CxG049 to S1CxG051: SMALL CIRCLE CUTTING

8.7.0.2 S1CxG052 to S1CxG053: SMALL CIRCLE CUTTING DIRECTION LIMIT
8.7.0.3 S1CxG054 to S1CxG055: SMALL CIRCLE CUTTING OVERLAP VALUE

8.7.0.4 S1CxG063, S1CxG064: PATTERN CUTTING DIMENSION

8.7.0.5 S1CxG065: MIRROR SHIFT SIGN INVERSION

8.7.0.6 S2C430: RELATIVE JOB OPERATION METHOD

8 Parameter

8.7 Parameters for Other Functions or Applications

Parameters for Other Functions or Applications
These parameters make the settings for other functions or applications.
These parameters prescribe cutting operation at small circle cutting.
S1CxG049  : Set the minimum diameter of a figure in the units of m
(Minimum diameter) that can be processed by small-circle cutting machine.
S1CxG050  : Set the maximum diameter of a figure in the units of m
(Maximum diameter) that can be processed by small-circle cutting machine.
S1CxG051 
: Set the maximum cutting speed at operation by CUT
(Maximum speed) instruction in the units of 0.1mm/s.
VALUE
These parameters set the cutting direction limits at small circle cutting.
S1CxG052 
: Set the limit value in the positive direction of cutting
(+ direction) angle DIR set by CUT instruction, in the units of 0.01.
S1CxG053 
: Set the limit value in the negative direction of cutting
(- direction) angle DIR set by CUT instruction, in the units of 0.01.
These parameters set the overlapped value at small circle cutting.
S1CxG054 
: Set the operation radius at inner rotation in the units of 1
m after overlapping by CUT instruction.
(Operation radius)
S1CxG055 
: Set the rotation angle at inner rotation in the units of 0.1
(Rotation angle) after overlapping by CUT instruction.
These parameters set the minimum diameter (S1CxG063) and the
maximum diameter (S1CxG064) for the pattern cutting in units of m.
This parameter sets which axis to be shifted (mirror-shift: invert the sign).
This parameter specifies how to operate a relative job. A method to
convert a relative job into a standard job (pulse), and a conversion method
to calculate the aimed position (pulse position) when a relative job is
operated can be specified.
0 : Previous step with priority (B-axis moving distance minimized.)
1 : Form with priority
2 Previous step with priority (R-axis moving distance minimized.)
8-49
1st axis (0: Not invert, 1: Invert)
7th axis
RE-CSO-A037
155507-1CD

480 of 554