Table of Contents
Advertisement
HOW ? After having raised the cover lid, carry out steps as
shown in the photos :
1 pull tape support completely towards you, then disengage the
used roll,
2 install a new roll in such a way that the tape unwinds up and
towards you. Insert the tape under the tape tension lever (see
threading diagram on the cover) then press the support to the
stop,
3 release the punch tape pressure plate and insert the tape until
it passes completely through,
4 depress tape pressure plate until it locks. A distinct click can
be heard.
5 depress Mj RUN-OUT key in order to check the correct
threading.
I
Advertisement
Table of Contents
