Replacing A Roll Of Tape On Your Teleprinter - Sagem TX20 Utilization Manual

replacing a roll of tape on your teleprinter
2 *
\ 1
WHEN ? Your teleprinter signals the end of tape as follows :
• d u r i n g m e s s a g e p r e p a r a t i o n ( L O C A L i n d i c a t o r l i g h t o n ) ,
PUNCH ON/OFF indicator light blinks and UNBLOCK KEYB.
light comes on.
— The KEYBOARD is blocked. Nevertheless you can end
message after depressing the UNBLOCK KEYB. key.
— The READER stops. Nevertheless you can end your mes
sage after depressing the READER ON/OFF key.
After 600 punched characters, the teleprinter writes you :
((TAPE OUT». Indicator lights LOCAL and PUNCH ON/OFF
extinguish.
« during a message (LINE indicator light on), audio-alarm is
energized and the TAPE PUNCH stops after 600 punched
characters.
Your message continues to print.
— Depressing PUNCH ON/OFF key releases audio-alarm,
— After depressing LOCAL key your teleprinter writes :
((TAPE OUT».
At the end of each week, ensure that your teleprinter is well sup
plied.
The chad drawer can be removed by sliding it to the front of the
teleprinter (like a table drawer).