How To Receive A Message; How To Send A Message - Sagem TX20 Utilization Manual

how to receive
a message ?
how to send
a message ?
This is completely automatic. During the entire transmission the
LINE key indicator light is illuminated.
With unit on STAND BY depress LINE key. The associated indi
c a t o r l i g h t b e g i n s t o b l i n k u n t i l C A L L C O N F I R M AT I O N ( a t
which time light remains on). If the line is busy, the indicator goes
out.
With LINE light illuminated, compose CORRESPONDENT CALL
NUMBER on the KEYBOARD.
After establishing communications, you can send your MESSAGE
on the KEYBOARD.
When finished, depress the LINE key again. The associated indi
cator light blinks until reception of END OF MESSAGE CONFIR
MATION at which time the indicator light goes out. Your COM
MUNICATION is then DISCONNECTED.
If your correspondent's unit has a derangement during the com
m u n i c a t i o n , y o u r t e l e p r i n t e r w i l l w r i t e y o u « D E R » a n d t h e
communication will be cut.