Advertisement
A.
!
!
!
!
!
B.
!
C.
!
CARE AND CLEANING INSTRUCTIONS
A. Cleaning Your Acrylic Bath
!
Do not use powdered cleaners unless the cleaner is
fully dissolved in water. Solid substances could
block the air jets.
!
Do not use full strength bleach or ammonia cleaning
solutions. Chemically active cleaning solutions can
damage the bath surface.
!
Do not use abrasive cleansers or solvents on acrylic
surfaces. Abrasive cleaners and solvents can
damage the bath surface.
!
Wipe out your acrylic bath with a soft cloth after
each use.
!
Avoid detergents, disinfectants, or cleaning products
in aerosol cans.
NOTE:
To restore dull or scratched units: Apply white
automotive polishing compound with a clean rag.
Rub scratches and dull areas vigorously. Wipe off
residue. Follow with a coat of white automotive paste
wax. Do not wax areas where you walk or stand.
B. Cleaning Your User Keypad
!
Use a soft cloth to wipe the keypad and remote
control after each use. If the surface becomes dirty,
use a non-abrasive soap and warm water to clean.
C. Maintaining the Airjets
!
If cleaning the airjets is required due to hard water
deposits, use a small between-the-teeth dental
Brush and white vinegar. Dip the brush in the
vinegar, brush the hole, rinse the brush in clean
water, and then use the wet rinsed brush to rinse the
hole.
8
1200098
-T01-B
Advertisement
